Die schnellsten JP Slalom Boards aller Zeiten. Ready to Race! Die Kombination aus einer kürzeren, paralleleren Outline und einer größeren Gleitfläche in der Mitte bringen das Board schneller ins Gleiten.
Durch die Konkave am Deck ist der Mastfuß und der Drehpunkt des Riggs tiefer gelegt. Für bessere Kontrolle ist die Masse zentriert. Der neue Heck Shape hat nicht nur mehr einen, sondern zwei Cut-Outs um den Wasserabriss zu optimieren und den Lift am Heck zu reduzieren. Die am Heck nach innen gezogene Outline reduziert auch die Gleitfläche, das Board kann somit jederzeit leichter getrimmt und austariert werden, um die Kontrolle und den höchstmöglichen Speed beizubehalten. Die Boards haben einen neuen Deck Shape mit dem Augenmerkauf Komfort und Leistungsfähigkeit. Die erhöhte Standposition verbessert den Hebel um den Druck von der Finne in bessere Beschleunigung und effizienteren Speed zu übertragen. Wähle entsprechend deinem Gewicht und Präferenzen zwischen dem 82 und 85er bei Leichtwind, und für Starkwind jeweils den 60 oder 62er. Die mittlere Größe mit 71 cm schließt die Lücke für alle Racer.
Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector. Especially recommended for novices and everybody, who wants to protect the board nose. The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose. The set consists of 5 pieces: 2 side parts (one left and one right), and 3 connections in sizes Small, Medium and Large. By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently. This makes it an universal protector not only for JP boards but for most boards available on the market. Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only! DOWNLOAD:LIMITED FINISH - LESS IS MORE Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength. AIR VALVE 
We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!
