Das JP Freestyle Team surft weiter auf Erfolgskurs! Mit Amado Vrieswijk NB-20 und Yentel Caers B-16 beendeten 2 unserer Fahrer die PWA-Saison auf dem Podium. Damit nicht genug! Steven Van Broeckhoven sicherte sich seinen 5. EFPT-Titel und Youngster Sam Esteve F-79 erreichte auf der European Tour auf Anhieb einen fantastischen 5. Platz. Für die Saison 2018 wurden die kleinsten und größten Boards der Freestyle- Linie überarbeitet – alle Größen weisen jetzt eine kompakte Shortboard-Outline auf und bieten ein überragendes Handling. Beeindruckende High Scoring Moves erfordern schnelle Rotationen. Deshalb ist die Masse nahe am Mastfuß zentriert, dem Drehpunkt der Boards. Durch das kompakte Design steht der Fahrer sehr komfortabel nahe am Rigg. Egal, ob Regular oder Switch Position - die verbesserte Kontrolle ermöglicht ungeahnt radikale Moves.
Unsere Teamfahrer lieben die freie Gleitlage der Boards. Erreicht wird diese durch ein geniales Unterwasserschiff-Konzept mit einem neuen V-Verlauf, der viel Lift erzeugt und für maximalen Speed und Pop unter den Füßen sorgt. Die breite Outline ermöglicht den Einsatz in allen erdenklichen Bedingungen. Die ausgewogene Volumenverteilung ist dabei die Basis für unsere erfolgreichen Freestyle Shapes. Die gestreckte Outline im Mittelbereich schafft eine vergrößerte Gleitfläche für unschlagbare Beschleunigung. Die rundere Outline im Heckbereich verbessert die Manövereigenschaften und den Pop für Sprünge und Rotationen bei Kombinations-Moves. Die scharfe Tucked-Under Edge vom Mastfußbereich zum Heck verleiht den Boards Grip und Drive für maximale Geschwindigkeit. Die weicheren Kanten im Bugbereich ermöglichen dazu einen flüssigen Übergang von Air Moves zu Sliding Tricks, da sie das Verschneiden der Rails verhindern.
Unsere kompakten Freestyle Boards bieten eine rasante Beschleunigung für hohe Sprünge. Die kurzen Designs verbessern das Handling bei allen Manövern und ermöglichen schnellere Rotationen. Das lebendige und direkte Fahrgefühl eröffnet
ambitionierten Freestylern wie Pros eine neue Dimension.
Spezifikation:
JP Freestyle Pro 2018:
85 Liter, Breite 60,5 cm, Länge 220 cm, Finne Freestyle 17.0 Powerbox System Gewicht 5,8 kg.
92 Liter, Breite 62,0 cm, Länge 220 cm, Finne Freestye 18,0 Powerbox System Gewicht 6,0 kg.
101 Liter, Breite 64,0 cm, Länge 220 cm, Finne Freestyle 19,5 Powerbox System Gewicht 6,4kg.
105 Liter, Breite 65,0 cm, Länge 221 cm, Finne Freestyle 21,5 Powerbox System Gewicht 6,5kg.
Boardbag: Concept X . Sie können das Board auch ohne Bag bestellen dann sparen Sie 59,-€.
DOUBLE HEEL PADS
RADICAL THRUSTER QUAD, WAVE SLATE, THRUSTER QUAD, YOUNG GUN RADICAL THRUSTER QUAD
6 + 4 mm = 10mm pads in the heel area. Great shock absorbing effect - very comfortable. Your heels are higher on the board for more power and control on your forefoot. Initiating turns is really easy.
DOUBLE COMFORT PADS
FREESTYLE WAVE, FREESTYLE, ALL RIDE, MAGIC RIDE, X-CITE RIDE, SUPER SPORT, YOUNG GUN FREESTYLE
6 + 4 mm = 10mm pads in the actual standing area provide unbelievable shock absorption and comfort.
Since 2004 the first JP PRO Edition boards have a (SUPER) LIMITED FINISH. By reducing the amount of paint (sanding off) the weight is decreased. Consequently, the boards have a custom look with certain "imperfections" in the paint, thus the material below might shine through. Sometimes they even look as if repaired. This is also true for the Full Wood Sandwich boards as they now feature a LIMITED FINISH, too. You won't find two boards exactly the same. We believe this is worth it as the weight reduction is substantial and there's no loss of durability or strength.
STORAGE
Store your board in mild (neither hot, nor cold; not exposed to sunlight), dry places !
Winter storage: non-freezing (constantly above +5 C).
Note: Avoid storage in closed, damp conditions like in a wet boardbag! So, after windsurfing and safe transport put the board out of its bag and let both dry separately - otherwise your board will suffer from osmosis and blisters (bubbles) will show up on the boards surface. And your bag might start to smell.
AIR VALVE
We highly recommend to open the air valve screw when the board is not used. Reason: Due to high pressure differences the sandwich construction suffers from high stress and can delaminate long term from the board's core. This will result in a soft spot and start absorbing water. Pressure differences are caused by high temperature variations or other pressure variations from e.g. aero planes. Do not forget to close the air vent before going on the water!
NOSE PROTECTOR
Damages caused by impacts are not covered under JP-Australia's limited warranty. Therefore, JP-Australia highly recommends the use of a nose protector.
Especially recommended for novices and everybody, who wants to protect the board nose.
The universal protector: Made of EVA, the UNI NOSE PROTECTOR is a very light yet strong protection. It is easy to handle as it is simply glued onto the nose.
The set consists of 6 pieces: 2 side parts (one left and one right), and 4 connections in sizes Small, Medium, Large and "Wave Slate".
By combining the two sides with the appropriate connection at the front, noses of almost all standard board sizes and shapes can be covered efficiently.
This makes it an universal protector not only for JP boards but for most boards available on the market.
Please note: The uni nose protector is not made for the use on demo boards or in windsurfing centers, but for private use only!
Comfortable footstrap incl. 2 screws. Anti-twist system. Adjustable plastic plates for width adjustment.
ADJUSTABLE WIDTH
Adjustable in width not just in length. By simply turning the plastic plate by 180 degrees, the width of the foostraps can be reduced by 0.6cm (one plate) respectively 1.2cm (both plates). Great for slalom sailors who need a tight connection to the board and for youngsters or women with smaller feet.HOW TO ADAPT YOUR FOOTSTRAPS TO LARGE FEET OR SAILING WITH BOOTS
Adjust your Foot Strap SIZE for very large foot strap sizes, change the Anti Twist plate for the outside position - recommended for foot size 11 (US) / 10 (UK) and bigger.- remove the screw
- remove the Anti Twist plate
- insert the bottom part of the Anti Twist plate into the outside holes of the belt
- put the top plastic part back on the pins
- insert the screw
- adjust the size of the foot strap to fit your foot
HOW TO ADAPT YOUR FOOTSTRAPS TO SMALL FEET:
5 Steps for a NARROW Foot Strap:- remove the screw
- pull off the top plastic part
- rotate the top plastic part 180°
- put it back on the pins
- insert screw and mount the strap
3D FOOTSTRAP
Strap incl. 2 screws.
Comfortable padding, changeable to asymmetrical shape when the strap is not centered - very comfortable!
set-up
Symmetrical - for rear center strap
Asymmetrical - for front straps and rear straps on the rail
